Viking RC-3 Manuel télécharger pdf

PRODUCT MANUAL

Designed, Manufactured and Supported in the USA

COMMUNICATION & SECURITY SOLUTIONS

Control Relay Contacts Remotely

Features

The RC-2A Remote Controller provides remote

relay operation from any standard Touch Tone

telephone.

The controller is designed to be installed either lo-

cally or remotely. For local installations the RC-2A

can be installed in parallel on any analog commu-

nications path, such as analog C.O. lines or analog

PABX/KSU stations and will passively monitor for

Touch Tone commands.

For off-premise applications, the RC-2A will an-

swer analog C.O. lines or PABX/KSU stations after

a selectable ring delay. A field programmable ac-

cess code can be programmed to prevent unau-

thorized usage, and then the RC-2A can be

activated to allow remote relay operation.

• Programmable access code

• Normally open or normally closed relay

• Selectable relay closure times

• Selectable ring delay (1, 2, 6, or 15)

• Universal 12-24V AC/DC power input

• Easy installation with screw terminals

and dip switch programming

• Automatic disconnect or return to secure

mode after 60 seconds

• Power multiple units from one adapter

• One year warranty

Remote Control of:

• High security building entry

• Heating/cooling equipment

• Pumps and fans

• Security systems

• Gates

• Lighting

• PABX/KSU reset

Power: 120VAC / 12VDC 500mA UL listed

adapter provided, alternative power input:

12-24V AC/DC 200mA minimum

Dimensions: 133mm x 89mm x 44mm

(5.25” x 3.5” x 1.75”)

Shipping Weight: .9 kg (2 lbs)

Environmental: -40°C to 70°C (-40°F to

160°F) with 5% to 95% non-condensing hu-

midity

Relay Contact Ratings: 5A @ 30VDC/

250VAC

Connections: (1) 8 position screw terminal

block

RC-2A

Remote Touch Tone

Controller

April 16, 2013

Applications

Specifications

www.vikingelectronics.com

Information: (715) 386-8861

VIKING

Note: For doorstrike control with Viking W-Series

Doorboxes, see Viking model SRC-1 (DOD#175)

or C-1000B (DOD# 168).

1 2 3 4 5 6 7 8

Résumé du contenu

Page 1 - PRODUCT MANUAL

PRODUCT MANUALDesigned, Manufactured and Supported in the USACOMMUNICATION & SECURITY SOLUTIONSControl Relay Contacts RemotelyFeaturesThe RC-2A R

Page 2 - Installation

Installation1231234567onVIKING©MODEL RC-2AREMOTE TOUCH TONE RELAY CONTROLLERVIKINGELECTRONICSHUDSON, WI 54016 RELAYCONTACTSN.O. COMN.C. POWER 12V DC 1

Page 3 - Legacy Programming Mode

3If you will be connecting the RC-2A to a telephone line or PABX extension (regardless of the mode you will beusing), the RC-2A is always monitoring t

Page 4 - 123456 7

1231234567onVIKING©MODEL RC-2AREMOTE TOUCH TONE RELAY CONTROLLERVIKINGELECTRONICSHUDSON, WI 54016 RELAYCONTACTSN.O. COMN.C. POWER 12V DC 123ENTRY CODE

Page 5

These activation codes are pre-programmed and cannot be changed except when using the Alternative Pro-gramming mode.C. Relay Activation CodesIn the

Page 6 - Operation

OperationIf the RC-2A is programmed to answer a ringing line (DIP switch 7 ON), it will answer after the selected ring delay.A single acknowledgement

Page 7 - Related Products

If the RC-2A is programmed to answer a ringing line (DIP switch 7 ON), it will do so after the selected ring delay.A single or double acknowledgement

Page 8 - Warranty

Printed in the U.S.A.IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666Our Technical Support Department