Viking VGIC53616BSS Guide d'installation télécharger pdf (Page 10)

Clearance Dimensions (Wood/Composite Overlay)

10

The bottom of a standard hood should be

30” (76.2 cm) min. to 36” (91.4 cm) max.

above the countertop. This would typically

result in the bottom of the hood being

66” (167.6 cm) to 72” (182.9 cm) above the

floor. Refer to the range hood installation

instructions for additional information.

These dimensions provide for safe and

efficient operation of the hood.

66”min.

(167.6 cm)

to

72”max.

(182.9 cm)

30”

(76.2 cm)

6”

(15.2 cm)

Wood/Composite

Overlay

30”min.

(76.2 cm)

to

36”max.

(91.4 cm)

66”min.

(167.6 cm)

to

72”max.

(182.9 cm)

24”

(61.0 cm)

or

27”

(38.6 cm)

Wood/Composite

Overlay

0”

(

0 cm)

30”min.

(76.2 cm)

to

36”max.

(91.4 cm)

Note: Minimum clearance for back wall

is 0” with backguard or high-shelf. See

Standoff Bracket Removal section to

allow 0” clearance.

Island Installation

Wall Installation

Important: This range comes standard

with an Island Trim. There must be a

minimum of 6” (15.2 cm) clearance from

rear of range to a combustible wall.

Clearances from non-combustible

materials are not part of the ANSI Z21.1

scope and are not certified by CSA.

Clearances to non-combustible materials

must be approved by the authority having

jurisdiction.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire