Viking 823 Manuel d'utilisateur

MAGNETIC DRIVE PUMPSSERIES 823 - STEEL825 - CAST IRON827 - STAINLESS STEELSIZES LQ, LS, Q & QSVIKING PUMP, INC. • A Unit of IDEX Corporation • Ced

SECTION TSM 845.1 ISSUE C PAGE 10 OF 13PUMP ASSEMBLYUse a lubricant compatible with the fluid being handled when reassembling the pump.Inspect all

SECTION TSM 845.1 ISSUE C PAGE 11 OF 132. Place a spacer under pump so the foot sits flat and clamp foot to the table. Install one of the

SECTION TSM 845.1 ISSUE C PAGE 12 OF 13TROUBLESHOOTINGSome of the following may help pinpoint the problem:Pump does not pump:• Pump has lost its p

TECHNICAL SERVICE MANUAL VIKING PUMP, INC. • A Unit of IDEX Corporation • Cedar Falls, IA 50613 USA© 5/2007 Viking Pump Inc. All rights reservedSECT

BEFORE opening any liquid chamber (pumping chamber, reservoir, relief valve adjusting cap fitting, etc.) be sure that : ● Any pressure in

SECTION TSM 845.1 ISSUE C PAGE 3 OF 13FIGURE 3 SPECIAL INFORMATIONDANGER !Before opening any Viking pump liquid chamber (pumping chamber, rese

SECTION TSM 845.1 ISSUE C PAGE 4 OF 13FIGURE 4CUTAWAY VIEW MAG DRIVE PUMP, MODEL LS-825 MD-D B ILLUSTRATEDSeries 825, 823, 827 pumps are designed f

SECTION TSM 845.1 ISSUE C PAGE 5 OF 13ITEM DESCRIPTION ITEM DESCRIPTION ITEM DESCRIPTION1 Brkt Gasket - Pilot Face 11 Pipe Plugs 21 Head Gaskets2 B

SECTION TSM 845.1 ISSUE C PAGE 6 OF 13DISASSEMBLY: PUMP1. See Figure 5 or Figure 6 on page 5 for name of parts.2. Mark the head, casi

SECTION TSM 845.1 ISSUE C PAGE 7 OF 13Before further disassembly of the pump can occur, the pump must be separated from the coupling. Refer

SECTION TSM 845.1 ISSUE C PAGE 8 OF 134. To facilitate disassembly, it may be necessary to slide a block of wood under the pump casing or

SECTION TSM 845.1 ISSUE C PAGE 9 OF 13BEARING HOUSINGDISASSEMBLY OF BEARING HOUSINGThe bearing housing features two grease packed tapered ro