Viking VCSF136DSS Guide d'installation télécharger pdf (Page 8)

Installation Requirements

Location Requirements

NOTES:

The cabinet depth refrigerator can be installed into a recessed opening, at the end of cabinets or

•

as a freestanding refrigerator.

If you are installing the refrigerator to t ush with the front of the base cabinets, all shoe molding

•

and baseboards must be removed from the rear of the refrigerator opening.

Location should permit doors to open fully. See the “Door Swing Dimensions” section.

•

Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where •

the temperature will fall below 55°F (13°C).

Floor must support refrigerator weight (more than 600 lbs [272 kg], door panels and contents).

•

Electrical Requirements

Before you move your refrigerator into its nal location, it is important to make sure you have the

proper electrical connection.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Pas de commentaire

Viking VCSF136DSS Guide d'installation Page 8