3
2. Trunk/Line Port
Step 1
Move the FXS/FXO switch to the
FXO position.
Step 2 Move DIP switch 6 to OFF.
Step 3
Connect terminals 5 and 6 to an un-
used telephone line input (trunk port)
or FXO.
Step 4
Adjust the page volume control to the
desired volume.
Note: For information on speakers to use, ambient
noise levels, and speaker wiring, see DOD# 498
and 895.
Note: For information on speakers to use, ambient
noise levels, and speaker wiring, see DOD# 498
and 895.
Step 1
Move the FXS/FXO switch to the
FXS position.
Step 2 Move DIP switch 6 to OFF.
Step 3
Connect terminals 5 and 6 to an
analog PABX extension, Centrex
Line or FXS.
Step 4
Adjust the page volume control to
the desired volume.
B. Loud Ringing/Night Bell
1. Ringing Analog Line
Step 1
Connect terminals 9 and 10 to a
ringing line, FXS or analog PABX
station.
Step 2
The ringing volume control may be
adjusted to required level.
Step 3
A night transfer switch may be
added to terminals 11 and 12 to en-
able and disable loud ringing.
Note: For information on speakers to use,
ambient noise levels, and speaker wiring,
see DOD# 498 and 895.
Commentaires sur ces manuels