Viking 15" W Manuel d'utilisateur télécharger pdf (Page 8)

Screw

Impressions

LEG LEVELER INSTALLATION

READ BEFORE INST

ALLING LEG LEVELERS

WARNING

Do not lay unit on top, side, back, or front. If unit is accidentally laid in any position other than right side up, then the

unit must remain in the right side up position for at least 24 hours before plugging the unit in.

1. Tip unit backwards so there is (1) foot of clearance on front of the unit. Have someone to assist you in tilting the

unit, to prevent it from falling on you while installing the leg levelers.

2. Screw front two leg levelers into the screw impressions. Leg levelers should be screwed in until snug.

3. Repeat steps 1 & 2, with the exception of tipping the unit forwards now, to screw in the back two leg levelers.

4. Your leg levelers are now installed.

5. The unit should be level from front to back and side to side. If floor conditions do not allow the unit to sit level,

adjust leg leveler(s) by turning the required leg leveler(s) counter-clockwise to increase their height and clockwise to

reduce their height.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Pas de commentaire

Viking 15" W Manuel d'utilisateur Page 8