Viking C-1000B Manuel d'installation télécharger pdf (Page 12)

Page 12 TYPE 115

Programming of Essex Keypad

1 Press “Program” switch (keypad will beep 4 times).

2 Enter 1115 (3 beeps).

3 Enter 1 for every 1 second latch time, and 5 for every 5 seconds.

Examples:

6 seconds = 5, 1

8 seconds = 5, 1, 1, 1

12 seconds = 5, 5, 1, 1

4 Wait 5 seconds for 4 reset beeps.

Set Activation Time Of Relay 2 (User codes 3, 4& 5 - see note below)

Step Action

Note: The above 2 steps are actually setting the activation times for user code 1, 2 and user code 3, 4, 5. Using the

jumper pin setting as shown in “Set Essex Relay Options”, this will set activaiton time of Relays 1 & 2.

1 Press “Program” switch (keypad will beep 4 times).

2 Enter 1117 (3 beeps).

3 Enter 1 for every 1 second latch time, and 5 for every 5 seconds.

Examples:

6 seconds = 5, 1

8 seconds = 5, 1, 1, 1

12 seconds = 5, 5, 1, 1

4 Wait 5 seconds for 4 reset beeps.

Set Activation Time Of Relay 1 (User codes 1 & 2 - see note below)

Step Action

1 2 ... 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire