Viking Emerald 122 Guide de l'utilisateur télécharger pdf (Page 11)

9

Raising and Lowering the

Presser Foot

The presser foot is raised and lowered

with the presser foot lever. The presser

foot must be down when sewing.

By raising the presser foot lever as far as

it goes the lift height of the presser foot

can be increased by 1/4” (0.6 cm). This

is useful for easy removal of the presser

foot or when placing heavy fabrics under

the foot.

1 Lowered position

2 Normal lift height

3 Extra lift height

Changing the Presser Foot

Turn off the power switch

1 Make sure the needle is in the

highest position. Pull the presser

foot towards you.

2 To put foot on, line up the cross pin

on the foot between the spring and

the presser foot ankle. Press back

until the foot snaps into place.

1

2

3

2

3

1

2

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Commentaires sur ces manuels

Pas de commentaire