Viking Interlude 445 Guide de l'utilisateur télécharger pdf (Page 10)

8

c

d

Learn your Interlude

Bobbin Winding with the

Machine Threaded

Make sure that the presser foot is

up and the needle is in the highest

position.

Note! Do not use a plastic presser foot

when bobbin winding.

1 Place your empty bobbin with the

small mark outwards on the

bobbin spindle on the front of the

machine. Bring the bobbin spindle

down.

2 Pull the thread from the needle under

the presser foot and to the right over

the thread guide (c).

3 Start from above and wind a few

turns of thread around the bobbin.

Cut off the thread on the thread knife

(d).

Note! We do not recommend winding

specialty threads such as clear nylon

or other stretchy threads through the

needle. Instead see ”Bobbin winding

– vertical spool pin”.

4 Press the foot control. When the

bobbin winding is ﬁ nished, remove

the bobbin, cut off the thread and

bring the bobbin spindle up.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Commentaires sur ces manuels

Pas de commentaire