Viking Interlude 445 Guide de l'utilisateur télécharger pdf (Page 24)

Functions and InfoDisplay

Change a Stitch

Any stitch can be changed in

PROG

when the stitch number is shown on

the InfoDisplay. Simply step through

the stitch combination with the arrow

buttons until you see the number of the

stitch you would like to change, and

select the correct stitch to replace it.

Adjust Stitches in a Program

If you want to adjust a stitch in a

programmed stitch combination use the

arrow buttons to step to the stitch. You

can adjust the stitch length and width

and mirror image a stitch.

The adjustments will automatically be

stored in the permanent memory

Sew your Program

To sew your program, touch FUNC to

bring up the REP mode. Presser foot B is

recommended. A stop is indicated by a

symbol.

To check your stitch sequence, use

the arrow buttons to move forwards/

backwards in the sequence.

Sew your program on a stabilized piece

of fabric.

Mirror image side to side

In NORM and PROG only the stitch

selected is mirrored. In REP the entire

pro gram is mirrored. You can also

change the straight stitch needle

position from left to right by mirror

imaging the width.

When mirror image side to side is

selected, the symbol

will be shown

on the Infodisplay.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 59 60

Pas de commentaire

Viking Interlude 445 Guide de l'utilisateur Page 24