Viking DLE-300 Manuel d'installation télécharger pdf (Page 31)

The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be

copied, used or distributed without prior authorization from Lencore Acoustics Corp.

-27-

Audio Cables

Audio cables are 4-pair CAT 5e or equivalent

x Must be plenum-rated

x Straight – pin cable (Pin 1->1, Pin 2->2, Pin 3->3,

Pin 4->4, Pin 5->5, Pin 6->6)

Audio connectors: RJ45 – MAKE SURE YOUR

CONNECTOR CAN ACCEPT 8 WIRES (4 PAIR)

Important Wiring Information

x Each OP has four channels for audio cables,

Channels A,B,C, D

x Each channel supports 1-8 speakers, for a total

of up to 32 speakers per OP.

x Wiring by channel, as specified by Lencore,

permits proper system zoning and tuning.

1. Run audio cable with RJ45 (4

PAIR) connectors from each

channel (A,B,C,D) on the OP to

the speakers listed on the

drawings.

a. Make sure that your audio

runs match the drawings

for three very important

reasons:

I. First, the speakers

and channels have

been specially laid

out to accomplish the

right sound in the

environment you are

installing the sound

masking. For

example, you will

most likely notice that

the speakers on a

channel stay in “like”

space, i.e., a channel

will have all of its

speakers in either an

open-plan space, a

closed-plan space, an

individual conference

room, etc.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Viking DLE-300 Manuel d'installation Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones Viking DLE-300