Viking DLE-300 Manuel d'installation télécharger pdf (Page 41)

The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be

copied, used or distributed without prior authorization from Lencore Acoustics Corp.

-37-

6. To Power the System:

1. Connect each power supply and i.Lon 100 Central Control Server and MPI to

a dedicated 20 amp receptacle. Each dedicated circuit must be a 120V/20

amp.

Once each item is connected, you may visually observe in the power supply a

lit green LED, and sequencing of lights on the i.Lon

server and MPI.

The i.Lon

needs approximately two minutes to completely boot up.

Once the system is plugged in:

2. You will not hear any sound for approximately 30 seconds. The OPs count

down from 20 to 0 before booting up. (This permits new software/firmware

uploads and tracking of any corrupt data.)

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

Viking DLE-300 Manuel d'installation Page 41