Viking DLE-300 Manuel d'installation télécharger pdf (Page 9)

The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be

copied, used or distributed without prior authorization from Lencore Acoustics Corp.

-5-

i.Lon

100 Internet Server

At the head-end of the Lencore sound

masking system is the i.Lon

100 server,

which acts as the system’s brain. This

server features solid construction, plus the

flexibility to monitor and control the sound

masking system from virtually anywhere.

The i.Lon

100 allows users to access the

sound masking system from a local

network, a virtual private network, through

the Internet, or directly through the i.Lon

100‘s user interface. It has an

authentication system that ensures only

authorized users are accessing the system.

With the i.Lon

100, the sound masking

i.Lon

100 is a registered

trademark of Echelon Corp.

system can be connected, remotely configured, monitored and controlled from across

the room or around the world.

The i.lon measurements are 5 9/16”w x 3 9/16”h x 2 ¼”d

The i.Lon

100 can also serve as a gateway for a variety of device types. It provides

universal connectivity for the devices attached to it, making their data available to

corporate IP networks or the Internet, and providing local device monitoring and control

via built-in scheduling, alarming and data-logging applications.

The system is capable of performing a complete diagnostic of all its functions, and can

report all settings for each of its controlled zones.

Din rail

Din Rail – slotted galvanized steel din rail,

length of 8 inches. This rail is used to

attach the i.Lon server to the wall

The i.Lon 100 Internet Server mounts to a 35mm x

7.5mm or 35mm x 15mm DIN rail located inside of a

suitable, safety-agency approved enclosure, and

mounted in a restricted access area. All high-

voltage wiring must be performed by a qualified

service person. The rear of the i.Lon 100 server

enclosure contains a spring-loaded DIN rail lock,

which securely grabs the DIN rail onto which the

enclosure is snap, mounted. To release the

enclosure from the DIN rail, insert a flathead

screwdriver into the DIN rail locking tab and gently

pull the tab upwards and away from the enclosure.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Viking DLE-300 Manuel d'installation Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones Viking DLE-300