Viking DLE-300 Manuel d'installation télécharger pdf (Page 28)

The information contained herein is proprietary to Lencore Acoustics Corp. and copyright protected. No part of this manual can be

copied, used or distributed without prior authorization from Lencore Acoustics Corp.

-24-

Data Cables

Data cables are 4-pair CAT 5e or equivalent

x Must be plenum-rated

x Straight-pin cable (Pin 1->1, Pin 2->2, Pin 3->3,

Pin 4->4, Pin 5->5, Pin 6->6, Pin 7->7, Pin 8->8)

Data connectors: RJ45

NOTE: Do NOT run data cable along side power wires.

Data wires must run at right angles to power wires

found in the plenum. Follow all proper procedures &

local codes.

TIA/EIA 568-B Configuration

1. Run data cable from the i.Lon

network hub or MPI in the electrical/IT closet to

the first OP and continue with the data wire from each OP in sequence.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Pas de commentaire

Viking DLE-300 Manuel d'installation Page 28